Splinter Works’ new limited edition bath tub, the Vessel, was inspired by the hammock. The slick and sexy tub was designed for use in a wet room and is completely suspended above the ground.
The Vessel Carbon Fiber Hammock Tub
The following text is from their press release:
Struck by the synergy between the shapes of two compelling symbols of relaxation, a hammock and a bath tub, Splinter Works were inspired to develop a piece that would provide the ultimate vehicle for total escapism.
The peaceful experience of kicking-back in a hammock has been further enhanced by combining it with the immersive comfort of soaking in a hot bath. By literally elevating the experience of bathing into a suspended sculpture the bathroom has been reinvented as a contemplative sanctuary for artful relaxation.
Designed for use in a wet room, Vessel is suspended from the walls and does not touch the floor. It is fixed with stainless steel brackets that can be covered over, or left revealed.
The bath is filled using a floor standing tap and the waste water released through the base into a floor drain. A downpipe drain can also be installed if a wet room setting is not possible.
Vessel is made from carbon fibre which is utilised for its inherent strength and ability to be formed into complex curves, furthermore the weave of the fabric references the cloth of a typical hammock. Beneath the layers of carbon fibre lies a foam core, which insulates the tub, meaning the bath stays hot for considerably longer than normal.
At 2.7m long, Vessel is longer than a regular bathtub, leaving plenty of room to share the experience. Custom sizes are available but it is also designed so that it can be trimmed up to 20 cm to allow for flexible installation. Pictured here in black, it also available in red, blue, yellow, pink, bronze and pure silver.
Limited Edition Design, Carbon Fibre
2500-2700 mm Long
800 mm Wide
About Splinter Works:
Splinter Works’ mission is to create furniture that is engaging and inspiring. Through their designs they strive to enrich the lives of users, enhancing their environment and elevating the experience of everyday life. Their aim is to create work that is individual, thought provoking, aesthetically beguiling, intelligently designed and seamlessly functional. The designs are experimental and theatrical, whilst maintaining the importance of the inherent function of the piece. The work revels in playing visual tricks where balance is often questioned. Opposing dichotomies of solidity versus weightlessness, motion versus stillness, and strength versus fragility are played out in ambitious designs through innovative materials. Splinter Works’ limited-edition collection currently ranges from desks, dressing tables, dining tables, consoles, loungers, stools, bath tubs and pool slides. Alongside working on their editioned portfolio, they produce unique commissions where every element, from the intended location and practical requirements, to striking a personal resonance with the commissioner, can be considered and accomplished.
All the pieces are all handmade in Britain. Splinter Works was formed in 2009 and is a collaboration between Miles Hartwell and Matt Withington.
The design studio is based in the UK, thirty minutes south of London.